We We inspect every piece of bearing by ourselves before delivery.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Single-row Angular contact ball bearings can sustain radial, axial or combined loads with the axial load being from one direction. The larger contact angle type has better axial load capacity while the smaller contact angle type has higher speed ratings. Available in bore dimension from 10 mm to 170 mm.
Common Options:
B — 40 degree contact angle
TVP– Polyamide Cage
MP– Machined Brass Cage
G– Flush Ground
Introduction:
1)The single row deep groove ball bearing are simple in design, non-separable, suitable for high and even very high speeds and are
robust in operation, requiring little maintenance.
2)Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to
accommodate axial loads in both directions, in addition to radial loads, even at high speeds.
3)Deep-groove bearings have higher load ratings for their size than shallow-groove , but are also less tolerant of misalignment of the inner and outer races.
4)A misaligned shallow-groove bearing may support a larger load than the same sized
deep-groove bearing with similar misalignment.
5)This kind of bearing are aslo avaible both in open design and sealed design.
6)The seals way of the bearing:
RS: contact seal on one side of the bearing
2RS: coontact seals on both sides of the bearing
Z: shield on one side of the bearing
ZZ(2Z): shields on both sides of the bearing.
7) Bearing with -RS s long tiller gearbox Soshanguve South Africa eals has better sealing but lower limited speed compared with the bearing with -Z seals.
Application:
The deep groove ball bearing can be used in many different places such as:
Gearbox, instruments and meters, electric motor, electric appliance, internal combustion engines, transportation vehicles,
agricultural machinery, ept machinery, ept machinery, and so on.
Advantage:
Most representative bearing of the rolling bearings
Suitable for high speed even extremely high speed
Durable, less maintenance frequency
Simple structure and low cost
Various size and designs.
6000 series deep groove ball bearings | ||||||
Bearing No. | Boundary Dimensions(mm) | Basic Load Rating(N) | Weight(KG) | |||
d | D | B | Cr | Cor | ||
604 | 4 | 12 | 4 | 960 | 350 | 0.571 |
605 | 5 | 14 | 5 | 1070 | 420 | 0.0037 |
606 | 6 | 17 | 6 | 1960 | 730 | 0.0069 |
607 | 7 | 19 | 6 | 2800 | 1060 | 0.0082 |
608 | 8 | 22 | 7 | 3290 | 1360 | 0.0129 |
609 | 9 | 24 | 7 | 3330 | 1410 | 0.016 |
6000 | 10 | 26 | 8 | 4160 | 1780 | 0.019 |
6001 | 12 | 28 | 8 | 5110 | 2380 | 0.571 |
6002 | 15 | 32 | 9 | 5590 | 2840 | 0.03 |
6003 | 17 | 35 | 10 | 6000 | 3250 | 0.039 |
6004 | 20 | 42 | 12 | 9390 | 5571 | 0.069 |
6005 | 25 | 47 | 12 | 10060 | 5860 | 0.08 |
6006 | 30 | 55 | 13 | 11900 | 7460 | 0.12 |
6007 | 35 | 62 | 14 | 16210 | 10420 | 0.16 |
6008 | 40 | 68 | 15 | 17030 | 11700 | 0.19 |
6009 | 45 | 75 | 16 | 21080 | 14780 | 0.25 |
6571 | 50 | 80 | 16 | 22000 | 16260 | 0.26 |
6011 | 55 | 90 | 18 | 31500 | 18400 | 0.39 |
6012 | 60 | 95 | 18 | 30000 | 23000 | 0.42 |
6013 | 65 | 100 | 18 | 32000 | 25000 | 0.44 |
6014 | 70 | 110 | 20 | 38000 | 31000 | 0.6 |
6015 | 75 | 115 | 20 | 38000 | 31000 | 0.64 |
6016 | 80 | 125 | 22 | 47500 | 40000 | 0.85 |
6017 | 85 | 130 | 22 | 47500 | 40000 | 0.89 |
6018 | 90 | 140 | 24 | 63800 | 59000 | 1.15 |
6019 | 95 | 145 | 24 | 66700 | 62300 | 1.2 |
6571 | 100 | 150 | 24 | 72500 | 70000 | 1.25 |
6200 Series Miniature Deep Groove Ball Bearing | ||||||
Bearing No. | Boundary Dimensions(mm) | Basic Load Rating(N) | Weight(KG) | |||
d | D | B | Cr | Cor | ||
624 | 4 | 13 | 5 | 1150 | 400 | 0.0032 |
625 | 5 | 16 | 5 | 1880 | 680 | 0.0051 |
626 | 6 | 19 | 6 | 2800 | 1060 | 0.0086 |
627 | 7 | 22 | 7 | 3290 | 1360 | 0.0131 |
628 | 8 | 24 | 8 | 3330 | 1410 | 0.017 |
629 | 9 | 26 | 8 | 4160 | 1780 | 0.0191 |
6200 | 10 | 30 | 9 | 5110 | 2380 | 0.032 |
6201 | 12 | 32 | 10 | 6180 | 3060 | 0.037 |
6202 | 15 | 35 | 11 | 7450 | 3700 | 0.045 |
6203 | 17 | 40 | 12 | 9560 | 4780 | 0.065 |
6204 | 20 | 47 | 14 | 12840 | 6650 | 0.11 |
6205 | 25 | 52 | 15 | 14571 | 7930 | 0.13 |
6206 | 30 | 62 | 16 | 19460 | 11310 | 0.2 |
6207 | 35 | 72 | 17 | 25670 | 15300 | 0.29 |
6208 | 40 | 80 | 18 | 29520 | 181400 | 0.37 |
6209 | 45 | 85 | 19 | 32500 | 20400 | 0.41 |
6210 | 50 | 90 | 20 | 35000 | 32300 | 0.46 |
6211 | 55 | 100 | 21 | 43500 | 29200 | 0.61 |
6212 | 60 | 110 | 22 | 52500 | 36000 | 0.78 |
6213 | 65 | 120 | 23 | 57200 | 45710 | 0.99 |
6214 | 70 | 125 | 24 | 62000 | 44000 | 1.05 |
6215 | 75 | 130 | 25 | 66000 | 49500 | 1.2 |
6216 | 80 | 140 | 26 | 72500 | 53000 | 1.4 |
6217 | 85 | 150 | 28 | 83500 | 64000 | 1.8 |
6218 | 90 | 160 | 30 | 96000 | 71500 | 2.15 |
6219 | 95 | 170 | 32 | 109000 | 82000 | 2.6 |
6220 | 100 | 180 | 34 | 122000 | 93000 | 3.15 |
ZheJiang DSR Bearing can supply you with the broadest possible array of bearings. In addition to Ball bearing, Roller bearing, Needle bearing, Pillow Blocks, we manufacture Flange blocks, Rolling mill bearing, Slide bearing and Water pump bearing. Our unparalleled experience as a total manufacturer and exporter for these industries is essential for the development and application of a premier product line for all general industries.
We pride ourselves on our ability to serve every customer, from backyard mechanics, to independent shop owners, to automotive technicians, to large manufacturing plants. Our Target Industries served are Agricultural Equipment, Cranes, Electric Motors, Gearboxes, Material Handling, Packaging Machinery, Power Tools, Pumps, Railways and Transportation, Robotics, and products for Textile Machinery. ZheJiang Bearing Company is a stronger and growing exporter of bearing in China.
In addition to manufacturing commodity-based bearing products, DSR Bearing makes custom bearing solutions for OEM. ZheJiang DSR bearing has stringent quality control standards and maintains complete control over supply, using only the highest grade bearing steel.
Our mission is to fully provide for you. ept into our more than Ten years of business, we are confident that you’ll find what you’re loo ept for in bearing product here. Please call, email, or stop by for more information.
We are very confident in our products, and we are sure that we can earn your trust!
Q: What the MOQ of your company?
A: In stock, MOQ is 1pc.
Q: Could you accept OEM and customize?
A: YES, we can customize for you according to sample or drawing.
Q: Could you supply sample for free?
A: Yes, we can supply sample for free, you only need to pay for the shipping cost.
Q: Is you company factory or ept Company?
A: We have our own factory, our type is factory + trade.
Q: Could you tell me the material of your bearing?
A: We have chrome steel, carbon steel, stainless steel and ceramic.
Q: Could you offer door to door service?
A: Yes, by express (DHL, FEDEX, TNT, EMS) 4-10 days to your city.
Q: What is your company payment terms?
A: T/T. Western Union, PayPal
Q: Could you tell me the delivery time of your goods?
A: If stock, in 7 days or base on your order quantity.
Dear friend, if you have any questions, contact us please.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.